Component Function Check

TESTING CONDITION: 

• Before performing the following procedure, confirm that battery voltage is more than 12.8 V while power switch ON. 
• Before performing the following procedure, confirm that all load switches and A/C switch are turned OFF. 

  GO TO 2.

1. Turn power switch ON.
2. Check the voltage between VCM harness connector terminals.

   VCM			Voltage
   Connector	+	-
   	Terminal	Terminal
   E62	42 (Battery current sensor signal)	43	Above 2.3 V at least once

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".