LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Murano CrossCabriolet >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Engine Control System - Component Testing (Except CROSSCABRIOLET)) >> Refrigerant Pressure Sensor >> Component Function Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK REFRIGERANT PRESSURE SENSOR FUNCTION
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector terminals under the following conditions.
    ECM Voltage (V)
    Connector + -
    Terminal Terminal
    F8 39 (Refrigerant pressure sensor signal) 40 (Sensor ground)

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals