Bulb Replacement
WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.
- Turn lighting switch OFF.
- Position aside the front fender protector as necessary. Refer to , "REMOVAL AND INSTALLATION ".
- Disconnect front fog lamp connector (1).
- Turn bulb socket (2) counterclockwise unlock and remove it.
- Remove bulb from its socket.