"P-SHIFT" Warning Lamp Check

CHECK WARNING LAMP OPERATION
With CONSULT
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT.
- Select "KNOB ON".
"P-SHIFT" warning lamp should illuminate.

Without CONSULT
1. Turn ignition switch OFF.
2. While monitoring the combination meter warning lamps, turn ignition switch ON. "P-SHIFT" warning lamp should illuminate for 1 second to perform a bulb check.
  OK or NG
  
  OK: Inspection end.
  
  NG: Check combination meter. Refer to COMBINATION METERS .