Warning Lamp Function Malfunction
NOTE:
- Before performing the diagnosis in the following table, check "Trouble Diagnosis Procedure". Refer to , "TROUBLE DIAGNOSIS PROCEDURE ".
- If the following "symptoms" are detected, check systems shown below in the "Diagnosis/service procedure" column in this order.
| Symptom | Diagnosis/service procedure | Refer to |
|---|---|---|
| Intelligent Key low battery warning does not operate properly. | 1. Check "LOW BAT OF KEY FOB WARN" setting in "WORK SUPPORT". | WORK SUPPORT |
| 2. Intelligent Key battery inspection. | INTELLIGENT KEY BATTERY INSPECTION | |
| 3. KEY warning lamp (green) check. | KEY WARNING LAMP (GREEN) ILLUMINATES | |
| 4. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT POWER SUPPLY AND GROUND CIRCUIT INSPECTION | |
| P position warning lamp does not illuminate properly. | 1. CVT shift selector (park position switch) check. | CVT SHIFT SELECTOR (PARK POSITION SWITCH) CHECK |
| 2. "P-SHIFT" warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK | |
| 3. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT POWER SUPPLY AND GROUND CIRCUIT INSPECTION | |
| Take away warning lamp does not illuminate properly. (Take away warning chime is operated). | 1. KEY warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT POWER SUPPLY AND GROUND CIRCUIT INSPECTION | |
| Ignition switch warning lamp does not illuminate properly. (Ignition switch warning chime is operated). | 1. KEY warning lamp (red) check. | "P-SHIFT" WARNING LAMP CHECK |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT POWER SUPPLY AND GROUND CIRCUIT INSPECTION |