Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Connect GST to data link connector (1).
- Accelerator pedal (2)
Fig 1: Identifying Data Link Connector And Accelerator Pedal
Courtesy of NISSAN NORTH AMERICA, INC.
Turn ignition switch ON.
Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this information, sample screens are shown in the figure.)

Fig 2: Display - GST Sample Screens
Courtesy of NISSAN NORTH AMERICA, INC.
Perform each diagnostic service according to each service procedure.
For further information , see the GST Operation Manual of the tool maker.

Fig 3: Generic Scan Tool Screen Display - Readiness Tests
Courtesy of NISSAN NORTH AMERICA, INC.