LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security Control System) >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2556:Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Press push-button ignition switch under the following condition.

      CVT models

      • Brake pedal: Not depressed

      M/T models

      • Clutch pedal: Not depressed
    2. Release push-button ignition switch and wait 100 seconds or more.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.

      Is DTC detected? 

      YES: Go to , "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals