LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Sentra FE+S >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (With Intelligent Key) >> DTC/Circuit Diagnosis >> DTC B2604: Shift Position >> DTC Logic >> DTC Confirmation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift the selector lever to the Park (P) position.
    2. Turn ignition switch ON and wait 5 seconds or more.
    3. Shift the selector lever to the Neutral (N) position and wait 5 seconds or more.
    4. Shift the selector lever to any position other than Park (P) and Neutral (N), and wait 5 seconds or more.
    5. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About LEMON Manuals