Ignition Battery Saver System

IGNITION POSITION [ON] 

When all the following conditions are met for 10 minutes, the battery saver system will cut off the power supply (ignition switch position ON → OFF) to prevent battery discharge.

IGNITION POSITION [ACC] 

When all the following conditions are met for 30 minutes, the battery saver system will cut off the power supply (ignition switch position ACC → OFF) to prevent battery discharge.

• Ignition switch is in the ACC position
• Turn signal lamp is not in operation
• Selector lever is in the P position

RESET CONDITION OF IGNITION BATTERY SAVER SYSTEM 

If any of the following conditions are met the battery saver system is released.

• Ignition switch is not in the ACC/ON position.
• Turn signal lamp is operation.
• Selector lever is not in the P position.