LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Juke SL, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B26F4: Starter Control Relay >> DTC Logic >> DTC Detection Logic
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Detection Logic

NOTE:
  • If DTC B26F4 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B26F4 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
B26F4 START CONT RELAY OFF BCM requests IPDM E/R to turn starter control relay ON, but BCM cannot receive starter control relay ON state signal from IPDM E/R.
  • Harness or connectors

    (CAN communication line is open or shorted.)

  • IPDM E/R
scientia non olet · About LEMON Manuals