April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

WARNING: This page is about a different variant/trim than selected.

PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. TIRE AIR PRESSURE .
GO TO STEP 2 .

PERFORM CALIBRATION

With CONSULT
1. Turn ignition switch ON.
  CAUTION:
  Never start engine.
2. Select "Work Support" mode in "ENGINE.
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".
  CAUTION:
  Never swing the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?

YES

END

NO

Perform steps 1 and 2 again.