Engine Room
| No. | Component | Function |
|---|---|---|
| (1) | IPDM E/R | IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication. Refer to COMPONENT PARTS LOCATION for detailed installation location. |
| (2) | Mass air flow sensor (with intake air temperature sensor) | MASS AIR FLOW SENSOR (WITH INTAKE AIR TEMPERATURE SENSOR) |
| (3) | Electric throttle control actuator | ELECTRIC THROTTLE CONTROL ACTUATOR |
| (4) | Power valve actuator 2 | POWER VALVE ACTUATOR 1 AND 2 |
| (5) | EVAP canister purge volume control solenoid valve | EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE |
| (6) | VIAS control solenoid valve 2 | VIAS CONTROL SOLENOID VALVE 1 AND 2 |
| (7) | VIAS control solenoid valve 1 | VIAS CONTROL SOLENOID VALVE 1 AND 2 |
| (8) | Power valve actuator 1 | POWER VALVE ACTUATOR 1 AND 2 |
| (9) | Refrigerant pressure sensor | REFRIGERANT PRESSURE SENSOR Refer to COMPONENT PARTS LOCATION for detailed installation location. |
| (10) | Electronic controlled engine mount control solenoid valve | ELECTRONIC CONTROLLED ENGINE MOUNT |
| (11) | Cooling fan motor-2 | COOLING FAN MOTOR |
| (12) | Cooling fan motor-1 | COOLING FAN MOTOR |
| (13) | ECM | ECM |
| (14) | Battery current sensor (with battery temperature sensor)* | BATTERY CURRENT SENSOR (WITH BATTERY TEMPERATURE SENSOR) |
| (15) | Cooling fan relay-2 | - |
| (16) | Cooling fan relay-3 |
*: Not used for engine control system.