LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Pathfinder SL, FWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> Removal And Installation >> Push Button Ignition Switch >> Removal And Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Removal

  1. Remove the instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
  2. Release the pawl (RARROWF ) on each side of the push-button ignition switch and NATS antenna amp. assembly (1) as shown and remove the push-button ignition switch and NATS antenna amp. assembly from the instrument pad (LH) (2).
    Fig 1: Releasing Pawl On Each Side Of NATS Antenna Amp
    G08683349Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release the pawl on each side of the push-button ignition switch and NATS antenna amp. assembly using a suitable tool, then remove the push-button ignition switch from the NATS antenna amp. assembly.
scientia non olet · About LEMON Manuals