Diagnostic Test
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
GO TO STEP 2 .
- REPLACE BCM
Replace BCM. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to WORK PROCEDURE .
GO TO STEP 4 (with remote keyless entry system).
GO TO STEP 6 (without remote keyless entry system).
- REGISTER IGNITION KEYS
For initialization and registration of ignition keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
GO TO STEP 5 .
- REGISTER KEYFOB ID
For registration of keyfob ID, refer to ID CODE ENTRY PROCEDURE .
Work End.
- REGISTER MECHANICAL KEYS
For initialization and registration of mechanical keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
Work End.