LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2018 >> Kicks S >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Chassis Control System >> Chassis Control >> DTC/Circuit Diagnosis >> U1010 Control Module (Can) >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DTC DETECTION 

    SYMBOL With CONSULT

    1. Turn the ignition switch OFF to ON.
      CAUTION: Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
    2. Perform self-diagnosis for "CHASSIS CONTROL".

    Is DTC "U1010-49" detected?

    Y1ES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals