DTC Detection Logic

DTC No.

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B210B

STR CONT RLY ON CIRC

(Starter control relay on circuit)

When comparing the following items, IPDM E/R detects that starter control relay is stuck in the ON position for 1 second or more.

• Ignition switch ON signal (CAN) from BCM
• Starter control relay control signal (CAN) from ECM
• Starter control relay and starter relay status signal (IPDM E/R input)
• Starter control relay control signal (IPDM E/R output)
• Ignition switch START signal
• Ignition power supply signal
• Cranking request signal from ECM

• Harness or connectors

  (CAN communication line is open or shorted.

  (Ignition switch START signal circuit is open or shorted.)

• IPDM E/R
• BCM