LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2018 >> Titan SL, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> System Description >> System >> Fail-safe >> EBD Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EBD Function

ABS warning lamp, brake warning lamp and SLIP indicator lamp in combination meter turn ON when a malfunction occurs in system [ABS Actuator And Electric Unit (Control Unit)]. The control is suspended for VDC function, TCS function, ABS function, hill start assist function and EBD function. The vehicle status becomes the same as models without VDC function, TCS function, ABS function and EBD function.

DTC

Malfunction detected condition

Fail-safe condition

C1101

When an open circuit is detected in rear wheel sensor RH circuit.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function (only when both rear wheels are malfunctioning)
  • BLSD function

C1102

When an open circuit is detected in rear wheel sensor LH circuit.

C1103

When an open circuit is detected in front wheel sensor RH circuit.

C1104

When an open circuit is detected in front wheel sensor LH circuit.

C1105
  • When power supply voltage of rear wheel sensor RH is low.
  • When distance between rear wheel sensor RH and rear wheel sensor RH rotor is large.
  • When installation of rear wheel sensor RH or rear wheel sensor RH rotor is not normal.

C1106
  • When power supply voltage of rear wheel sensor LH is low.
  • When distance between rear wheel sensor LH and rear wheel sensor LH rotor is large.
  • When installation of rear wheel sensor LH or rear wheel sensor LH rotor is not normal.

C1107
  • When power supply voltage of front wheel sensor RH is low.
  • When distance between front wheel sensor RH and front wheel sensor RH rotor is large.
  • When installation of front wheel sensor RH or front wheel sensor RH rotor is not normal.

C1108
  • When power supply voltage of front wheel sensor LH is low.
  • When distance between front wheel sensor LH and front wheel sensor LH rotor is large.
  • When installation of front wheel sensor LH or front wheel sensor LH rotor is not normal.

C1109
  • When ignition voltage is 10 V or less.
  • When ignition voltage is 16 V or more.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1111
  • When a malfunction is detected in motor or motor relay.
  • When a low pressure malfunction is detected in accumulator.
  • When a malfunction is detected in accumulator pressure sensor.

C1115

When difference in wheel speed between any wheel and others is detected while the vehicle is driven, because of installation of tires other than specified.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C1116

When stop lamp switch signal is not input when brake pedal is depressed.

C1118

When a malfunction is detected in transfer control unit.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C1120

When a malfunction is detected in front LH ABS IN valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1121

When a malfunction is detected in front LH ABS OUT valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1122

When a malfunction is detected in front RH ABS IN valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1123

When a malfunction is detected in front RH ABS OUT valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1124

When a malfunction is detected in rear LH ABS IN valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1125

When a malfunction is detected in rear LH ABS OUT valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1126

When a malfunction is detected in rear RH ABS IN valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1127

When a malfunction is detected in rear RH ABS OUT valve.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1130

When a malfunction is detected in ECM system.

The following functions are suspended:

  • VDC function
  • TCS function
  • Hill start assist function
  • BLSD function

C1140

When a malfunction is detected in actuator relay.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1142

When a malfunction is detected in master cylinder pressure sensor.

The following functions are suspended.

  • VDC function
  • TCS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C1143

When a malfunction is detected in steering angle sensor.

C1144

When neutral position adjustment of steering angle sensor is not complete.

C1145
  • When a malfunction is detected in yaw rate signal.
  • When yaw rate signal is not continuously received for 2 seconds or more.
  • When side G signal is not continuously received for 2 seconds or more.
  • When decel G signal is not continuously received for 2 seconds or more.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C1146

When a malfunction is detected in side/decel G signal.

C1155
  • When brake fluid level low signal is detected.
  • When an open circuit is detected in brake fluid level switch circuit.

C1160

When calibration of yaw rate/side/decel G sensor is not complete.

C1164

When a malfunction is detected in cut valve 1.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • EBD function
  • BLSD function

C1165

When a malfunction is detected in cut valve 2.

C1166

When a malfunction is detected in suction valve 1.

C1167

When a malfunction is detected in suction valve 2.

C1170

When the information in ABS Actuator And Electric Unit (Control Unit) is not the same.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C1187

When a malfunction is detected in the differential lock control unit.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function

C118E

When performing excessive brake pedal operation with the vehicle stopped. [When accumulator fluid pressure reaches 11.43 MPa (114 bar, 116.6 kg/cm 2 , 1657 psi) after reaching 17.3 MPa (173 bar, 176.5 kg/cm 2 , 2509 psi.]

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • EBD function
  • Hill start assist function
  • BLSD function

U1000

When CAN communication signal is not continuously received for 2 seconds or more.

The following functions are suspended:

  • VDC function
  • TCS function
  • ABS function
  • Hill start assist function
  • Hill descent control function
  • BLSD function
scientia non olet · About LEMON Manuals