Input/Output Signal Chart
WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
|
Sensor |
Input signal to ECM |
ECM function |
Actuator |
|
Crankshaft position sensor Camshaft position sensor |
Engine speed* 2 |
Air conditioner cut control |
IPDM E/R - A/C relay - Compressor |
|
Engine coolant temperature sensor 1 |
Engine coolant temperature |
||
|
Accelerator pedal position sensor |
Accelerator pedal position |
||
|
Battery |
Battery voltage* 2 |
||
|
Refrigerant pressure sensor |
Refrigerant pressure |
||
|
Power steering pressure sensor |
Power steering operation |
||
|
A/C auto amp. |
A/C ON signal* 1 |
||
|
A/C evaporator temperature* 1 |
|||
|
Target A/C evaporator temperature* 1 |
|||
|
Blower fan ON signal |
|||
|
Combination meter |
Vehicle speed* 1 |
*1: This signal is sent to the ECM via the CAN communication line.
*2: ECM determines the start signal status by the signals of engine speed and battery voltage.