Work Procedure

• Always perform the distance sensor (ICC sensor) alignment aiming adjustment after removing and installing or replacing the distance sensor (ICC sensor).
  CAUTION: The system does not operate normally unless the distance sensor (ICC sensor) is aligned properly.
• Perform the ICC system action test to check that the ICC system operates normally.

Work Procedure 

1. DISTANCE SENSOR (ICC SENSOR) ALIGNMENT ADJUSTMENT 

   Adjust the distance sensor (ICC sensor) alignment. Refer to Work Procedure .

   GO TO 2.

2. ICC SYSTEM ACTION TEST 
   1. Perform the ICC system action test. Refer to Description .
   2. Check that the ICC system operates normally.

   Inspection End.