Distance Sensor Handling
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
The distance sensor is located on the front of the vehicle. To keep the Automatic Emergency Braking system operating properly, be sure to observe the following:
- Always keep the distance sensor area clean.
- Do not strike or damage the areas around the distance sensor.
- Do not cover or attach stickers or similar objects near the sensor area. This could cause failure or malfunction.
- Do not attach metallic objects near the distance sensor area (brush guard, etc.). This could cause failure or malfunction.
- Do not alter, remove or paint the front bumper.