Application Item

CONSULT can display each diagnostic item using the diagnostic test modes as follows.

Diagnosis mode	Function description
Self Diagnostic Result	Self diagnostic result and freeze frame data can be read and erased quickly. ^*
Data Monitor	Displays real-time input/output data of chassis control module (with built in steering angle sensor).
ECU Identification	Displays chassis control module (with built in steering angle sensor) part number.
Active Test	Enables an operational check of a load by transmitting a driving signal from the chassis control module (with built in steering angle sensor).
Re/programming, Configuration	Read and save the vehicle specification (TYPE ID). Write the vehicle specification (TYPE ID) when replacing chassis control module (with built in steering angle sensor).

*: The following diagnosis information is erased by erasing: