Work Procedure
- Always perform the distance sensor configuration after replacing the distance sensor.
- Always perform the radar alignment after removing and installing or replacing the distance sensor.CAUTION: The system does not operate normally unless the distance sensor configuration and the radar alignment are performed. Always perform them.
- Perform the AEB system action test to check that the AEB system operates normally.
- DISTANCE SENSOR CONFIGURATION
Perform the distance sensor configuration with CONSULT. Refer to Work Procedure .
GO TO 2.
- PERFORM RADAR ALIGNMENT
Perform the radar alignment. Refer to Work Procedure .
GO TO 3.
- AEB SYSTEM ACTION TEST
- Perform the AEB system action test. Refer to Work Procedure .
- Check that the AEB system operates normally.
INSPECTION END