Switch Test: Toronado
- Check circuit fuse by operating dome lights. Connect test light to ground and check for 12 volts at Orange wire. If test light comes on, connect test light between Orange and Black wire. If test light does not come on, check Orange and Black wire circuits.
- If a mirror does not operate, place mirror selector switch in position to operate inoperative mirror. Connect test light between Yellow and Light Green terminals of outside mirror switch. Test light should come on when mirror control switch is in up and down positions.
- Connect test light between Light Blue and White terminals of outside mirror switch. Test light should come on when mirror control switch is in left and right positions.
- If test light comes on but mirror does not turn, check wiring and motor. If test light does not come on when switches are in position to energize its terminals, replace outside mirror switch.