Test Description

The numbers below refer to the circled numbers in the diagnostic flow chart.

Test Number 1)  This step verifies proper operation of circuits 633, 644, and 645. See Figure for circuit identification.

Test Number 2)  Step validates the integrity of Circuit 630 from the ignition module to the ECM. See Figure for circuit identification.

Test Number 3)  If the camshaft gear magnet is interfacing with the cam sensor the voltage reading will be zero, bumping engine will cause the condition to go away.

Test Number 4)  If the voltage reading of terminal "BC5" is constantly varying and connection to terminal "BC5" are good, the ECM is faulty.