LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1992 >> Eighty-Eight Royale >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry System >> Testing >> Transmitter/Module Isolation Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter/Module Isolation Test

  1. Connect Tech 1 scan tool to ALDL Connector. Set Tech 1 to monitor signals received by Remote Accessory Control (RAC) module. Press any transmitter button. If Tech 1 indicates a signal is received by RAC module, check RAC module connector for good terminal contact. If terminal contact is okay, replace RAC module. See REMOVAL & INSTALLATION. Program new RAC. See PROGRAMMING PROCEDURE.
  2. If Tech 1 does not indicate a signal is received by RAC module, repeat test using another transmitter. If Tech 1 indicates a signal is received by RAC module, replace suspect transmitter. If Tech 1 does not indicate a signal is received by RAC module, check RAC module connector for good terminal contact. If terminal contact is okay, replace RAC module. See REMOVAL & INSTALLATION. Program new RAC. See PROGRAMMING PROCEDURE.