Ignition Control Module: Service and Repair

Ignition Coils And Module:

Typical Ignition Module Assembly:

REMOVE OR DISCONNECT
- Connector at ignition module.
- Spark plug wires at coil assembly.
- Nuts and washers (3) securing ignition module assembly to bracket.
- Screws securing coil assemblies to ignition module.
- Note lead colors or mark for reassembly.
- Connectors between coil and ignition module.
- Ignition module.


INSTALL OR CONNECT
- Ignition module.
- Connectors between coil and ignition module.
- Note lead colors or mark for reassembly.
- Screws securing coil assemblies to ignition module.
- Nuts and washers (3) securing ignition module assembly to bracket.
- Spark plug wires at coil assembly.
- Connector at ignition module.