Transmitter Programming
- Ground terminal No. 8 (Black/White wire) of Data Link Connector (DLC) located under lower left side of instrument panel. Receiver will respond by locking and unlocking all doors within 2 seconds. Press any button of first transmitter to be programmed. Control module will respond by locking/unlocking all doors and activating liftgate release (if equipped).
- Press any button of second transmitter to be programmed (if equipped). Control module will again respond by locking/unlocking all doors and activating liftgate release (if equipped). Remove ground from DLC terminal No. 8. Transmitter operation can be verified by locking and unlocking doors and automatically activating liftgate release.