Right Power Mirror Does Not Operate In Up/Down Positions
- Using test light, backprobe between power mirror switch terminals "D" (Light Blue wire) and "F" (Yellow/Black wire). Move power mirror switch to up and down positions. If test light glows in both positions, go to next step. If test light does not glow in one or both positions, replace power mirror switch.
- Backprobe between power mirror connector terminals "C" (Light Green/Black wire) and "B" (Yellow/Black wire). Move power mirror switch to up and down positions. If test light glows, replace power mirror. If test light does not glow, repair open in Light Green/Black or Yellow/Black wire between power mirror switch connector and power mirror connector.