Caster Adjustment
WARNING: This page is about a different car, the 1996 Oldsmobile Ninety-Eight and 1996 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- With vehicle on ground (suspension loaded), remove nuts securing strut upper mount to body at each strut tower. See Fig 1 . Raise front of vehicle until strut studs have cleared holes.
- Drill 11/32" holes at each strut stud hole, then file excess material between holes to create an elongated slot. Lower vehicle to install strut into tower. Adjust caster to specification. See WHEEL ALIGNMENT SPECIFICATIONS . Tighten nuts to specification. See TORQUE SPECIFICATIONS .