LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1997 >> Achieva SC, 2.4 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Body Control Module) >> Diagnosis & Repair >> DTC U1255, Loss Of Class 2 Serial Data Fault
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC U1255, Loss Of Class 2 Serial Data Fault

WARNING: This page is about a different car, the 1997 Oldsmobile Cutlass and 1997 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. If BFC diagnostic system check was performed, go to next step. If BFC diagnostic system check was not performed, go to BFC DIAGNOSTIC SYSTEM CHECK  .
  2. Connect scan tool. Turn ignition on. Using scan tool, establish communications with BFC. If communication can be established, go to next step. If communication cannot be established, go to step 4).
  3. Using scan tool, establish communication with other modules. If communication can be established, go to step 5). If communication cannot be established, go to next step.
  4. Locate and repair problem in DLC system. See appropriate wiring diagram in DATA LINK CONNECTORS article in WIRING DIAGRAMS. Go to step 7).
  5. Clear DTCs. Check for DTCs. If DTC U1255 exists, go to next step. If DTC U1255 does not exist, go to step 7).
  6. Replace BFC. See REMOVAL & INSTALLATION  . Go to next step.
  7. Clear DTCs. Perform BFC DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals