Specifications Index
BLAZER, BRAVADA, JIMMY, SONOMA, S10 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | 181 Ft. lbs. (245 N.m) | ||
| AWD | 103 Ft. lbs. (140 N.m) | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | See table under DESCRIPTION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Drive Belt Routing | See appropriate figure under SERPENTINE DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi | ||
| Thermostat R & I | |||
| 2.2L | NA | ||
| 4.3L | NA | ||
| Water Pump R & I | |||
| 2.2L | WATER PUMP | ||
| 4.3L | WATER PUMP | ||
| Engine Mechanical | |||
| 2.2L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | 56 psi (3.9 kg/cm2 ) at 3000 RPM | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 4.3L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure (Minimum) | 6 psi (41.2 kPa) at 1,000 RPM 18 psi (124.1 kPa) at 2,000 RPM 24 psi (165.5 kPa) at 4,000 RPM |
||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.2L | 55 Ft. lbs. (75 N.m) Apply thread locking compound | ||
| 4.3L | 74 Ft. lbs. (100 N.m) | ||
| Fuel System | |||
| Pressure Specification | |||
| 2.2L | 41-47 psi (282.7-324.1 kPa) | ||
| 4.3L CSI | 60-66 psi (413.7-455.1 kPa) | ||
| 4.3L SFI | 56-62 psi (386.1-427.5 kPa) | ||
| Fuel Pressure Test Procedure | |||
| 2.2L | FUEL SYSTEM PRESSURE TEST | ||
| 4.3L | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location | In fuel line between tank and fuel rail | ||
| Fuel Filter R & I | |||
| 2.2L | IN-LINE FUEL FILTER REPLACEMENT | ||
| 4.3L | IN-LINE FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.2L | FIRING ORDER | ||
| 4.3L | FIRING ORDER | ||
| Ignition Wires (Resistance) | 30,000 Ohms Maximum | ||
| Ignition Wires (Routing) | |||
| 2.2L | NA | ||
| 4.3L | FIRING ORDER | ||
| Spark Plug | |||
| 2.2L | |||
| Type | 24574912 | ||
| Gap | NA | ||
| Torque | 13 Ft. lbs. (17 N.m) | ||
| 4.3L | |||
| Type | AC 41-932 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 15 Ft. lbs. (20 N.m) | ||
| Starting | |||
| Starter | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | Front Wheel Drive 96 Ft. lbs. (130 N.m) AWD 100 Ft. lbs. (140 N.m) |
||