Locks Do Not Operate From Either Switch
- Disconnect door lock relay connector at left side of instrument panel. Connect a test light between chassis ground and Orange wire terminal of door lock relay connector. If test light is off, repair open Orange wire. If test light is on, connect test light between Orange wire and Black wire terminals of relay connector.
- If test light is off, repair open Black wire. If test light is on, connect test light between chassis ground and Light Blue wire terminal of relay connector. Hold either switch in lock position. If test light is on, go to next step. If test light is off, repair open Orange wire between fuse block and switch, or open Light Blue wire between switch and relay.
- Connect test light between chassis ground and White wire terminal of relay connector. Hold either switch in unlock position. If test light is off, repair open White wire. If test light is on, reconnect relay connector.
- Connect test light between Gray wire and Tan wire terminals of relay connector. Hold either switch in lock position. If test light is off, replace relay.
- If test light is on, leave relay connector attached and leave test light connected between Gray wire and Tan wire terminals. Hold either switch in unlock position. If test light is off, replace relay. If test light is on, check for open Gray wire or Tan wire. Repair as necessary.