Cruise Control Cable: Installation
WARNING: This page is about a different car, the 1997 Pontiac Grand Am, 1997 Oldsmobile Achieva, and 1997 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Ensure ribbon into cruise control module is not twisted. Adjust cruise control cable. See CRUISE CONTROL CABLE under ADJUSTMENTS . Ensure center high mounted brakelight is operating.
4) Check fuses, and replace as necessary. Visually inspect for broken or open wires. Ensure any aftermarket electronic equipment is properly installed.