Cruise Control Module Assembly
WARNING: This page is about a different car, the 1997 Oldsmobile Aurora and 1997 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
Cruise control module assembly is located at left rear of engine compartment, mounted near center of firewall. Module assembly allows vehicle to obtain desired cruise speed set by functional control switches. Module assembly is composed of two components: an electronic controller and an electric stepper motor. The controller monitors vehicle speed and operates electric stepper motor. The electric stepper motor moves a connecting strap that is attached to the cruise control cable. The cable moves the throttle linkage to maintain desired cruise speed. Cruise control module assembly contains a low speed limit to prevent system engagement at speeds lower than 25 MPH. Module assembly is not serviceable.