Door Do Not Lock From Either Remote Transmitter
- Disconnect remote control door lock receiver Black 16-pin connector. See Figure . Connect a fused jumper between remote control door lock receiver connector terminals "P" (Orange wire) and "R" (Light Blue wire). If doors lock, go to next step. If doors do not lock, go to step 3).
- Replace remote control door lock receiver. Verify system operation.
- Using a fused jumper connected to battery voltage, backprobe LH I/P wiring harness junction block connector C3 terminal B3 (Light Blue wire). If doors lock, go to next step. If doors do not lock, go to step 5).
- Repair open circuit in Light Blue wire between remote control door lock receiver and LH I/P wiring harness junction block. Verify system operation.
- Replace LH I/P wiring harness junction block. Verify system operation.