Doors Do Not Unlock From Either Remote Transmitter
- Disconnect remote control door lock receiver Black 16-pin connector. See Figure . Connect a fused jumper between remote control door lock receiver connector terminals "B" (White wire) and "P" (Orange wire). If doors unlock, go to next step. If doors do not unlock, go to step 3).
- Replace remote control door lock receiver. Verify system operation.
- Using a fused jumper connected to battery voltage, backprobe LH I/P wiring harness junction block connector C3 terminal B5. If doors lock, go to next step. If doors do not unlock, go to step 5).
- Repair open circuit in White wire between remote control door lock receiver and LH I/P wiring harness junction block. Verify system operation.
- Replace LH I/P wiring harness junction block. Verify system operation.