Fuel Level Sensor Replacement

Fuel Level Sensor Replacement

Removal Procedure

Important: Always maintain cleanliness when servicing fuel system components.

1. Relieve fuel system pressure. Refer to Fuel Pressure Release Procedure.
2. Remove the modular fuel sender assembly.




3. Remove the fuel level sensor (5) from the modular fuel sender.





Installation Procedure
1. Install the fuel level sensor (5) to modular fuel sender.
2. Install the fuel sender assembly.

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.

3. Connect the negative battery cable.
4. Inspect for fuel leaks.
4.1. Turn the ignition switch ON for 2 seconds.
4.2. Turn the ignition switch to the OFF for 10 seconds.
4.3. Turn the ignition switch ON.
4.4. Check for fuel leaks.
5. Reinstall the fuel injection sight shield. Refer to Engine Cover Replacement Service and Repair.