Preliminary Tests
WARNING: This page is about a different car, the 1997 Oldsmobile Aurora and 1997 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
On all PG260 starter motors, starter is serviced as an assembly. If test values do not meet specifications, replace starter and solenoid as an assembly.
Remove starter from vehicle. See REMOVAL & INSTALLATION . Check starter for damage such as broken or stripped electrical terminals, broken or cracked drive end housing, etc. If no obvious damage is found, perform starter no-load test and pinion clearance check before disassembling starter motor.