Test 5: All Windows Except Left Front Inoperative From Master Switch Assembly

NOTE: After any repair is made, perform system check. See SYSTEM CHECK under TROUBLE SHOOTING.

Perform system check. See SYSTEM CHECK under TROUBLE SHOOTING. Go to next step.
Disconnect master switch assembly connector. Turn ignition switch to RUN position. Using DVOM, measure voltage between ground and Brown wire terminal at master switch assembly. If battery voltage exists, go to next step. If battery voltage does not exist, go to step 4 .
Replace master switch assembly. See WINDOW SWITCH under REMOVAL & INSTALLATION.
Repair open in Brown wire to master switch assembly. See WIRING DIAGRAMS .