Dim Pot Input

Range: ACTIVE/INACTIVE
The BCM uses the dim pot input in order to determine the position of the dome lamp switch (thumb wheel) when the park lamps are ON.

ACTIVE displays when the dome lamp switch is not in the FULL DOWN position and the park lamps are ON.

INACTIVE displays when you turn the dome lamp switch to the FULL DOWN position (dash lights OFF) and the park lamps are ON.

The headlamp reminder chime does not sound under the following conditions:
^ The dome lamp switch (thumbwheel) is in the FULL DOWN position (MAX DIM).
^ You turn the park lamps ON manually.
^ You remove the ignition key.