Specifications Index
LESABRE, BONNEVILLE, EIGHTY-EIGHT SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | ManualSPECIFICATIONS AutomaticSPECIFICATIONS |
||
| Torque | ManualTORQUE SPECIFICATIONS AutomaticTORQUE SPECIFICATIONS |
||
| Axle Nut/Hub Nut | 107 Ft. Lbs. (145 N.m) | ||
| Battery | NA | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | DESCRIPTION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | SERPENTINE BELT ROUTING & ALIGNMENT -- CARS | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi or specification stamped on cap. | ||
| Thermostat R & I | NA | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure (with 5W-30 or 10W-30 engine oil) should be 60 psi (4.2 kg/cm2 ) at 1850 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| Step 1 | 11 Ft. Lbs. (15 N.m) | ||
| Step 2 | Additional 50 Degrees | ||
| Fuel System | |||
| Pressure Specification Ignition ON and engine OFF. |
48-55 psi (3.4-3.9 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST (EXCEPT SATURN) | ||
| Fuel Filter Location and R & I | REMOVAL PROCEDURE (LESABRE, BONNEVILLE, EIGHTY-EIGHT) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION . | ||
| Ignition Wires (Resistance) | Replace wire if resistance exceeds 600 ohms per foot. | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug | |||
| Type | AC 41-921 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 20 Ft. Lbs. (27 N.m) | ||
| Starting | |||
| Starter | SOLENOID WINDINGS TESTS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (136 N.m) | ||