Changing Automatic Door Lock/Unlock Mode

The automatic door lock/unlock mode can be changed with a door lock switch method or a scan tool. To change the automatic door lock/unlock mode using the scan tool, see manufacturer's instructions.

To change the automatic door lock/unlock mode using the door lock switch method, perform the following procedure:

1. Close all vehicle doors.
2. Turn the ignition switch to RUN position.
3. Step firmly and hold the brake pedal.
4. Press and hold the lock on either door lock switch.
5. While holding lock on the door lock switch, shift the transaxle out of PARK. The automatic door lock/unlock mode remains in Mode 3, and all doors lock.
6. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 3, and all doors unlock.
7. While still holding lock on the door lock switch, shift the transaxle out of PARK. The automatic door lock/unlock mode changes to mode 4, and all doors lock.
8. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 4, and only the driver's door unlocks.
9. While still holding lock on the door lock switch, shift the transaxle out of PARK. The automatic door lock/unlock mode changes to mode 1, and all doors do not lock.
10. While still holding lock on the door lock switch, shift the transaxle into PARK. The automatic door lock/unlock mode remains in mode 1, and doors do not unlock.
11. To advance the mode, shift the transaxle out of PARK then back into PARK again while holding the door lock switch in the lock position.
12. A transition past mode 4 repeats the sequence starting with mode 1.
13. To exit and save the current customization mode, release the door lock switch when obtaining desired mode.
14. Mode 3 is set when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.