Passenger Climate Control Switch Replacement

PASSENGER CLIMATE CONTROL SWITCH REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the trim panel retaining fasteners from the lower armrest bezel.
3. Remove the lower armrest bezel. Use a thin-bladed tool.
4. Disengage the switch plate retainer clips. Insert a small, flat-blade tool between the switch plate and the trim panel.
5. Lift the switch plate.
6. Disconnect the electrical connectors.
7. Remove the passenger climate control.

INSTALLATION PROCEDURE
1. Install the passenger climate control to the switch plate.
2. Connect the electrical connectors.
3. Install the switch plate in the trim panel. Push inward the switch plate.
4. Install the trim panel retaining fasteners.
5. Connect the negative battery cable.