Section 362 (Body Front End): Specifications
WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Baffle to Radiator Support | 12 N.m | 106 lb in |
| Air Inlet Grille Panel to the Cowl Vent Screws | 11 N.m | 97 lb in |
| Front Fender Extension to the Body Bolts | 11 N.m | 97 lb in |
| Front Fender Extension to the Rocker Panel Bolt | 2 N.m | 18 lb in |
| Front Fender to the Body Bolts | 25 N.m | 18 lb ft |
| Hood Hinge Pivot Bolts and Nuts | 25 N.m | 18 lb ft |
| Hood Latch to the Radiator Support Bolts | 15 N.m | 11 lb ft |
| Hood Support Rod to the Fender Bolt | 11 N.m | 97 lb in |
| Radiator Grille Lower Molding to the Radiator Grille Nuts | 1 N.m | 9 lb in |
| Radiator Support to the Vehicle Bolts | 25 N.m | 18 lb ft |
| Upper Fender Filler Panel Applique to the Upper Fender Filler Panel Screws. | 2 N.m | 18 lb in |
| Upper Fender Filler Panel to the Body Screws | 2 N.m | 18 lb in |