Scan Tool Data Definitions

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.

Ambient Light Sensor: The scan tool displays 0.0 to 5.0 volts, depending on light intensity.

Park Brake Switch: The scan tool displays On/Off. The input of the park brake switch is displayed as On when the park brake is On.

LCM Lights On Chime: The scan tool displays On/Off. The input of the LCM Lights on chime is displayed as On when the headlamp switch is On with the ignition off and the key removed.

Courtesy Switch: The scan tool displays On/Off. The input of the courtesy switch is displayed as On when the courtesy lamps are command On.

Courtesy Ground: The scan tool displays Present/Not Present, the input of the courtesy ground is displayed as Not Present when the ground for the courtesy lamps is not detected.

Rt. Turning Signal Sw.: The scan tool displays Inactive/Active, the input of the Rt. Turning Signal Sw. is displayed as active if the turn signal switch is activated in the turn right position.

Lt. Turning Signal Sw.: The scan tool displays Inactive/Active, the input of the Lt. Turning Signal Sw. is displayed as active if the turn signal switch is activated in the turn left position.

Headlamp Switch: The scan tool displays Inactive/Active. The input of the Headlamp switch is displayed as active when the headlamp lamps are command On.

Inadvert. Power Output: The scan tool displays On/Off. This output of the BCM is displayed as On when the Inadvert. power output is present.

Front Fog Lamp Relay: The scan tool displays On/Off. This output of the BCM is displayed as On when the fog lamps are turned on.

Right Turn Signal: The scan tool displays On/Off. This output of the BCM is displayed as On, if the turn signal switch is activated in the turn right position.

Left Turn Signal: The scan tool displays On/Off. This output of the BCM is displayed as On, if the turn signal switch is activated in the turn left position.

Headlamps: The scan tool displays On/Off. This output of the BCM is displayed as On, if the BCM commands the headlamps On.

Parklamps: The scan tool displays On/Off. This output of the BCM is displayed as On, if the BCM commands the park lamps On.

Theater Dimming #1: The scan tool displays On/Off. This output of the BCM is displayed as On, if the BCM commands the courtesy lamps to dim.