LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Antilock Brake System) >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the traction control switch.
  2. Connect the electrical connectors to the heater seat switches.
  3. Position the traction control/heated seat switch to the front floor console trim plate.
  4. Install the traction control/heated seat switch into the console trim plate pressing in until the retainers are fully seated.
    Fig 1: Connecting Electrical Connector
    G01569909Courtesy of GENERAL MOTORS CORP.