Removal Procedure
- Remove the right coat hook. Refer to COAT HOOK REPLACEMENT
in Interior Trim.
NOTE:
In order to avoid damaging the antenna lead connector, follow these guidelines:
- Use a plastic tool and carefully pry the connector from the window.
- Do NOT pull on the connector, which may be stuck to the urethane adhesive or the headliner.
- Disconnect the control module electrical connector from the stationary glass.
Courtesy of GENERAL MOTORS CORP.
- Release the rear headliner to roof retainers.
- Lower the rear of the headliner far enough to access the control module located on the right side of the vehicle.
- Disconnect the electrical connector from the control module.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the coax cable from the control module.
- Remove the control module from the headliner retaining strips.
- Remove the control module from the vehicle.