LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2002 >> Intrigue GL >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Strut, Strut Component and/or Spring Replacement >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

  1. Remove the strut from the vehicle. Refer to STRUT ASSEMBLY REPLACEMENT
  2. Install the strut (1) in the J 34013-B  using adapters J 34013-971, J-34013-972  and the J 3289-20. 
  3. Turn the compressor forcing screw (3) until the spring compresses slightly.
    Fig 1: Installing Strut In J 34013-B Using J 34013-971, J-34013-972 And J 3289-20
    G01757210Courtesy of GENERAL MOTORS CORP.
  4. Use a 45 TORX® socket in order to hold the strut shaft. Remove the strut mount nut by turning with J 42991. 
  5. Install the J 34013-197  to help guide the strut shaft out of the strut upper mount.
  6. Loosen the compressor screw while guiding the strut shaft out of the strut upper mount. Continue loosening the compressor forcing screw until you can remove the strut and the spring.
    Fig 2: TORX® Socket, J 42991 And J 34013-197
    G01757211Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals