Engine Cooling Torque Specifications
ENGINE COOLING TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| EGR Inlet Pipe Bolt | 18 (25) |
| EGR Inlet Pipe Nut | 44 (60) |
| Rear Lift Bracket Bolt | 18 (24) |
| Surge Tank Inlet Fitting | 35 (47) |
| Transaxle Oil Cooler Line (At Radiator) | 23 (31) |
| Water Housing Crossover Bolt | 18 (25) |
| Water Pump | 74 (100) |
| INCH Lbs. (N.m) | |
| Condenser Mounting Bolt | 115 (13) |
| Cooling Fan Mounting Bolt | 53 (6) |
| Electric Cooling Fan Blade Retaining Nut | 53 (6) |
| Electric Cooling Fan Motor Mounting Screw | 53 (6) |
| Engine Coolant Heater Bolt | 89 (10) |
| Fuel Rail Bracket Retaining Nut | 35 (4) |
| Oil Level Indicator Tube Nut | 89 (10) |
| Secondary AIR Relay Bracket Nut | 53 (6) |
| Surge Tank Bolt & Nut | 53 (6) |
| Thermostat Housing Bolt | 89 (10) |
| Transaxle Oil Cooler Line Retaining Bolt | 53 (6) |
| Upper Radiator Mounting Bracket Bolt | 89 (10) |
| Water Pump Belt Tensioner Bolt | 89 (10) |
| Water Pump Cover bolt | 89 (10) |