Programming Theft Deterrent System Components

If the 10 minute learn procedure is chosen, perform the special function for BCM "Request VTD Info. for SPS" or select Service Programming Systems, and then refer toProgramming Theft Deterrent System Components in Theft Deterrent. If the Programming Theft Deterrent System Components in the Theft Deterrent procedure is not performed after a BCM replacement, one of the following conditions will occur:

• The vehicle will not be protected against theft by the Passlock System.
• The engine will not crank or start.

This procedure also needs to be performed when replacing the passlock sensor or when replacing the PCM with one used before in a different vehicle.